34020-01385 · 00 · 07/2022
13EN
OperationTruma CP plus
6.3 Switching on/off
Switching on
Press the rotary push button
•
Previously set values / operating
parameters are reactivated after
switching on�
Switching off
Press the rotary push button for
more than 4 seconds.
•
After 2 seconds, “APP” is dis-
played on the screen (if iNet Box is
connected)�
•
"OFF" appears after another
2 seconds�
•
Due to internal time lags of the
heater or air conditioning system,
it may take a few minutes for the
Truma CPplus to switch off�
If you park your vehicle in an enclosed space or
if you will not be using it for an extended period,
during winter for example, you must switch off the
CPplus�
6.4 App mode with iNet Box
Switch on app mode
Press the rotary push button for about 2 seconds un-
til “APP” appears on the screen�
Release the rotary push button�
Ending app mode
If no commands are entered via the Truma App, app
mode can be closed on the Truma CPplus�
Briefly press the rotary push button�
The saved values are then applied next time it is put
into operation�
6.5 Setting the room temperature
The room temperature setting depends on the operating
mode (HEATER, AC, AUTO)� You must select the mode
before setting the room temperature� (This is unneces-
sary if just one appliance is connected to the CP plus�)
Each operating mode has its own adjustable room
temperature range� In other words, different room tem-
perature ranges can be selected in heating, cooling or
automatic mode�
To Next Page
Loading...
Need help?
General
