Truma CP plus User Manual

8
34020-01385 · 00 · 07/2022
EN
Method of operation Truma CP plus
4.3 Using CP plus and IR remote control
for the air conditioning system
together
2
1
3
4
5
6
1 CP plus
2 Combi (D)
3 Air conditioning system
4 IR receiver
5 Air distributor
6 IR remote control
Even when the CP plus is connected, the IR remote
control can still be used to control the air conditioning
system� The CP plus detects all settings on the air con-
ditioning system that were set via the IR remote control�
The IR remote control sends only the settings shown on
your screen (no bidirectional communication)�
Use only the CP plus time switch to define the start and
end time of a required period�
4.4 Using CP plus and iNet Box together
3
1
2
4 5
BLUETOOTH
POWER
GSM
iNet Box
1 iNet Box
2 Mobile device with Truma App
3 CP plus
4 Heater
5 Air conditioning system
In app mode, the connected appliances and the
Truma CPplus go to stand-by mode and wait for new
commands from the connected iNet Box�

Truma CP plus Specifications

General

Display	LCD
Power supply	12 V DC
Quiescent current consumption (at 12 V)	Approx. 5 mA
Temperature range	-15 °C to +60 °C
Protection class	IP20
Compatibility	Truma Combi heaters