Truma CP plus User Manual

24
34020-01385 · 00 · 07/2022
EN
Maintenance Truma CP plus
If the cause has not been remedied, the malfunction
will occur again and the CPplus will go to the “Mal-
function” menu level again�
If the fault code flashes in the control panel display, this
cannot be reset until up to 15 minutes have elapsed�
Cause not eliminated / return to the setting level

Press the Back button�
In this case, the malfunction is not acknowledged in the
CPplus and the warning symbol remains� The appliance
remains in malfunction state� Other connected appli-
ances can be operated�
10 Maintenance
The CPplus requires no maintenance� Use a damp,
non-scouring cloth to clean the front panel� If this is not
sufficient, use a neutral soap solution�
11 Disposal
Dispose of the CPplus in accordance with the administra-
tive regulations of the country in which it is used� National
regulations and laws (in Germany, for example, the End-
of-life Vehicle Regulation) must be observed�
12 Technical data
Screen LCD, monochrome, with
background lighting
Dimensions
(L x W x H) 92 x 103 x 40 mm
Operating temperature
range -25°C to +60°C
Storage temperature
range -25°C to +70°C
Interfaces
CP plus TIN bus
CP plus CI BUS TIN bus, CI bus
Power supply 8V – 16�5V DC
Power consumption max� 65 mA (100% back-
ground lighting)
6�5 mA – 10 mA (stand-by)
Quiescent current
consumption 3 mA (Off)
Weight approx� 100g
Protection class Class III
Protection type IP00
Subject to technical changes�

Truma CP plus Specifications

General

Display	LCD
Power supply	12 V DC
Quiescent current consumption (at 12 V)	Approx. 5 mA
Temperature range	-15 °C to +60 °C
Protection class	IP20
Compatibility	Truma Combi heaters