EasyManua.ls Logo

Truma CP plus - 3�3 Obligations of the Operator;; Vehicle Owner; 3�4 Installation, Dismantling, Repositioning; 3�5 Important Notes

Truma CP plus
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34020-01385 · 00 · 07/2022
5EN
Safety instructionsTruma CP plus
3.3 Obligations of the operator/ / vehicle
owner
Make sure that the appliance can be operated prop-
erly in all operating phases�
3.4 Installation, dismantling,
repositioning
Only competent, trained personnel (experts) may in-
stall and repair the Truma product and carry out the
function check with consideration of the installation
and operating instructions and the current recognised
rules of engineering� Skilled personnel refers to persons
who are capable of properly carrying out the neces-
sary work and recognising possible hazards based on
their specialist training and education, their knowledge
and experience with Truma products and the relevant
standards�
For experts only
Do not install, dismantle or reposition the
device on your own.
Have the device installed, dismantled or
repositioned only by an expert�
3.5 Important notes
If the power supply to the system has been inter-
rupted, the time / time switch must be reset�
When a new or replacement appliance (heater, air
conditioning system or Truma iNet Box) is connected
to the bus system, repeat the procedure described in
“Initial start-up” (page12)�
If a Combi heater is connected to the CPplus, you
can no longer use the time switch ZUCB�

Other manuals for Truma CP plus

Related product manuals