Truma Saphir - IR Receiver (Optional)

Saphir Product Description
9EN
40090-00130 · 01 · 11/2023
Resend
Fan setting low
Fan setting medium
Fan setting high
Temperature value
Degrees Fahrenheit
Degrees Celsius
Time display (AM / PM)
Timer On / O
4.8 IR receiver (optional)
The IR receiver (Fig. 16) has the following display and
control panels:
1
2
3
4
Fig. 16
1 Green LED
2 Infrared sensor
3 ON/OFF button
4 Red LED
The additional push button on the IR receiver (Fig. 16-3),
with which the device can also be switched on and o
without the remote control (e.g. with a ballpoint pen).
When the unit is switched on, it will return to its previ-
ous settings.
LED display Description
Green LED flashes IR receiver receives signals from
the remote control
Red LED lights Malfunction
1
1)
See: “Troubleshooting guide“ on page 18.
TIMER ON
TIMER OFF
Switch timer on/o
HOURS +
HOURS -
Set hours
SETUP
Takes you to the setup menu
MIN +
MIN -
Set minutes
RESEND
Send last settings
DEHUMIDIFY
Activate dehumidification function
RESET
Resets the remote control and requires
repairing the remote with the Saphir.
4.7.4 Display
The remote control has an LCD (Fig. 15) that shows the
current settings. The display does not have background
lighting.
MODE
TEMP
Saphir
Fig. 15
Symbol Description
Cooling mode
Dehumidify mode
Heating mode
Night mode
Automatic mode
Circulated air mode
Setup