Modifications to the Unauthorized changes or modifications to the machine by the owner
machine or the operator are strictly prohibited; the manufacturer shall not be
held liable for any injury to persons or material damage resulting
therefrom.
Instructing the Only authorized, trained and suitably instructed personnel may be
personnel entrusted with the operation, maintenance and service of the machine.
This personnel must receive specialized instruction regarding possible
hazards.
Reading the The complete technical documentation on the machine should be
documentation made available for study to all persons charged by the owner with the
operation, maintenance and service of the machine. It is
recommended that the owner obtain written confirmation from his staff
that they have studied and understood the documentation.
Maintenance work
The mains plug must always be disconnected before undertaking any
adjustment, maintenance and service work on the machine unless
indicated otherwise.
Using original parts Original parts and accessories have been designed especially for the
machine. Replacement parts for these original parts and accessories
other than those supplied by the manufacturer of the machine are not
inspected and approved by the manufacturer. The incorporation
and/or use of such products may, therefore, have an adverse effect on
the function of the machine and diminish its safety.
Liability disclaimer The manufacturer shall not be held liable for any damage incurred
through the use of non-original parts and accessories or through
improper installation or exchange of original parts and accessories.
Notes on work safety
The technical documentation on the machine provides information on
working safety that is of vital importance for the prevention of injuries
ensuing from hazards to health and life. The symbol on the left calls
your attention to this type of information.
☞ For your safety: These statements must be observed without
fail!
B60E quicksharp 5
To Next Page
Loading...
General