1. For your safety
With the quicksharp you have at your disposal a grinding machine
which, in terms of safety, is state-of-the-art and safe in operation.
With the declaration of EC conformity and the CE label on the
machine, we confirm that the quicksharp complies with the relevant
regulations on occupational health and safety as stipulated in EC
Machinery Directive 89/392/EEC.
6840-H 3
1,7
16
M achine N °.
20
Nameplate and CE marking Fig. 24072E
The nameplate, together with the CE marking, is affixed to the rear of
the machine.
Despite all these provisions, however, the machine may still represent
a source of danger if incorrectly operated by untrained personnel or if
used for unauthorized application.
☞ In addition to the guidelines provided in this manual, the
general guidelines governing safety and accident prevention
must also be observed!
Authorized application The quicksharp is designed for grinding dies, flat punches and
Whispertools.
Liability voided in the Any application beyond and above this shall be construed as
event of unauthorized unauthorized application. The manufacturer shall not be held liable for
application! any damages resulting therefrom; the entire risk rests solely with the
user.
4 quicksharp B60E
To Next Page
Loading...
General