19
4. Pre-boot Preparation Works
4.1 Pre-boot Check
In order to ensure the safety of operators and Machine, check the following items before
booting
.
1. Check if oil in the lube oil tank is sufficient?
2. Ensure that space around the Machine and control system is clear.
3. Ensure that every panel and door is closed.
4. Ensure that all control switches are at good condition.
5. Is there anyone in the Machine’s danger area?
6. Does operator wear suitable clothing and correct personal protection equipment
7. Clean up residual water in the air pressure regulators filter.
8.. Check if compressed air, lubrication, hydraulic and cooling system pipelines are
secure.
9. Check and make sure that all safety devices are operating.
14. Certify that toolsand workpiece is secure..
To Next Page
Loading...