24
5.1.3 Maintenance Check Sheet
1. Daily maintenance sheet
Check air pressure of air-pressure
regulator
Clean up chips in chips tank
Check if oil in oil-feeder is sufficient
Check if the indicators on the board
are all normal
Check if the switches on the board are
all normal
Clean up chips on jaw chuck
Clean up chips in machine
Clean up chips in X-, Z-axis cover
Locking tool holder and pull handle
Clean up chips sticking on tool holder
2. Weekly maintenance sheet
Check if oil-feeding pressure of
oil-feeder is normal
Clean up dust on electric-box fan
Jaw chuck surface antirust-oiling
Antirust-oiling and lubrication of X-
protection covers
Tool holder antirust-oiling
Discharge recycled lube oil from
three-axis