3
1. Safety Notes
1.1 Safety Specification
This machine is equipped with safety devices designed to protect operators from being hurt
or the machine being damaged. Operators should thoroughly read this Manual as well as
undergo the compulsory training programme before operating this Machine.
Ensure there is sufficient space around the Machine to open the electrical-box door for
maintenance/repair and space to allow normal access to and from the machine. Assign
qualified electrical personnel to wire this Machine from the plant power supply.
Do not operate the machine if any safety devices have been damaged or removed.
.
1.2 General Safety Notes
1. If you have any safety queries – do not operate the machine.
2. All maintenance and repairs must be undertaken by skilled and trained personnel..
3. Operator should wear appropriate clothing during operation. Do not wear loose fitting
clothing and remove or cover rings and watches.
4. Operators must use approved personal safety equipment.
5. Do not allow other personnel to stand around the machine while it is operating.
6. Ensure the work area around the machine is free from obstruction.
7. When cleaning the machine or removing machined parts do not climb into the
machine.
8. Keep the work area clean and dry.
9. Do not store or keep flammable or hazardous substances near the machine.
10. Do not try to modify this Machine or method of operation.
11. Keep the observation window clean.
12. This Machine is equipped with three-colour alarm light to indicate the alarm status
(red-danger (push the emergency-stop button), amber-warning (abnormal occurs), and
green-normal in operation).
13. Do not attempt to machine oversize work pieces.
14. Do not leave any article or tool within the work chamber.
To Next Page
Loading...