TSC TTP-2410MT Series User Manual

- 77 -
The printing position of small
label is incorrect
* Media sensor sensitivity is
not set properly.
* Label size is incorrect.
* The parameter Shift Y in the
LCD menu is incorrect.
* The vertical offset setting in
the driver is incorrect.
* Calibrate the sensor sensitivity again.
* Set the correct label size and gap size.
* Press [MENU]  [SELECT]
x3[DOWN]x6  [SELECT] to fine tune
the parameter of Shift Y.
* If using the software BarTender, please
set the vertical offset in the driver.

TSC TTP-2410MT Series Specifications

General

Brand	TSC
Model	TTP-2410MT Series
Category	Barcode Reader
Language	English