TSC TTP-244 Plus User Manual

6. Disengage the printer carriage by pulling the carriage release lever upwards.
7. Following the direction of the ↓ RIBBON label, pull the transparent ribbon
leader to the front from under the ribbon mechanism.
8. Attach the ribbon leader to the empty paper core on the ribbon rewind spindle
(with a tape).
9. Rotate the ribbon rewind spindle until the ribbon overlaps the ribbon leader
and stretches tight.
13

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)