TSC TTP-244 Plus User Manual

3.3 Ribbon Loading Instructions
1. Place an empty paper core on the ribbon rewind spindle.
2. Insert the left side first. Mount the ribbon rewind paper core on the front hubs.
3. Please be noted that the bigger hub side with 4 ribs must be installed toward
the right side of ribbon mechanism.
4. Install a ribbon on the ribbon supply spindle. Mount the ribbon supply spindle
on the rear hubs.
5. Insert the left side first. Please be noted that the bigger hub side with 4 ribs
must be installed toward the right side of ribbon mechanism.
12

TSC TTP-244 Plus Specifications

General

Resolution	203 dpi
Print Speed	4 ips
Print Method	Thermal Transfer / Direct Thermal
Weight	2.5 kg
Max. Print Width	4.25 inches
Max. Print Length	90 inches
Processor	32-bit RISC CPU
Interface	RS-232
Label Width	1 inch to 4.4 inches
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Humidity	25% to 85% non-condensing
Label Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)
Dimensions	232 mm (W) x 156 mm (H) x 288 mm (D)