TSC TTP-245C - Opening and Closing the Top Cover

TTP-245C/ TTP-343C/ TTP-244CE
Bar Code Printer Service Manual
11
3. MECHANISM
Please turn off the power switch and unplug the power adapter before replacing parts.
3.1 Replacing Top Cover and Media View Window Cover
1. Turn the printer upside down and use the Phillips screwdriver to remove the 4 screws from
hinge holder.
2. Open the printer top cover by pulling the top cover open lever located on each side
towards the front of the printer, then lift the top cover to the maximum open angle.
3. Use the Phillips screwdriver to remove the 6 screws from the top inner cover.
4. Use the slotted screwdriver to remove the 2 screws that hold the print head bracket.
Screws
Screws
Screws
Screws
Top cover