TSC TTP-245C - Printer Diagnostic Tool; Starting the Diagnostic Tool

TTP-245C/ TTP-343C/ TTP-244CE
Bar Code Printer Service Manual
22
3.9 Cutter Module Installation (Option)
1. Refer to section 3.2 to remove the lower cover.
2. Open the top cover and pull up the front panel from the printer.
3. Thread the cutter module 8-pin harness through the front slot of lower inner cover.
4. Connect the cutter module harness connector to the 8-pin white socket on the printer main
board.
Harness of the
cutter module
Slot
Front panel