TSC TTP-245C - Loading Media in Cutter Mode

TTP-245C/ TTP-343C/ TTP-244CE
Bar Code Printer Service Manual
21
5. Then, put back the lower inner cover.
6. Close the top cover and then upside down the printer.
7. Fasten the 6 screws at the lower inner cover.
8. Open the peel-off cover. Disengage one of platen holder tab from lower inner cover and
rotate the tab 90 degrees to install the peel-off bar into the both slots. Then, rotate the tab
90 degrees to engage the platen holder tab to the lower inner cover.
9. Place the printer in the flat and secured desktop for media loading and printing.
Tenon
Slot
Tab
Peel-off bar