TSC TTP-245C - Printer Functions via Diagnostic Tool

TTP-245C/ TTP-343C/ TTP-244CE
Bar Code Printer Service Manual
23
5. Then, put back the lower inner cover.
6. Place the cutter module into the both sides notches of lower inner cover as picture below,
then push cutter to lock into the lower inner cover.
7. Close the top cover and then upside down the printer.
8. Fasten the 6 screws at the lower inner cover.
9. Place the printer in the flat and secured desktop for media loading and printing.
8-pin socket
Cutter module