TSC TTP-286MT

- 36 -
5.6.2 Ethernet
Use this menu to configure internal Ethernet configuration check the printer’s Ethernet
module status, and reset the Ethernet module.
Item
Description
Default
Status
Use this menu to check the Ethernet IP address and
MAC setting status.
N/A
DHCP
This item is used to ON or OFF the DHCP (Dynamic
Host Configuration Protocol) network protocol.
N/A
Static IP
Use this menu to set the printer’s IP address, subnet
mask and gateway.
N/A
Menu Interface Ethernet
Status
Configure
DHCP
Static IP