TSC TTP-345 User Manual

USER’S
MANUAL
TTP-245 Plus / TTP-343 Plus
TTP-247 / TTP-345
THERMAL TRANSFER / DIRECT THERMAL
BAR CODE PRINTER

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply

Summary

Introduction to the Bar Code Printer

Getting Started with Your Printer

Overview of initial setup, unpacking, and component identification.

Printer Unpacking and Inspection

Procedures for checking the printer and packaging upon arrival.

Printer Equipment Checklist

List of all included items with the printer package.

Printer Parts Identification

Identification of external and internal components of the printer.

Printer Setup and Configuration

Initial Printer Setup

Instructions for placing and connecting the printer to a power source.

Loading the Printer Ribbon

Step-by-step guide for installing the ribbon correctly.

Loading Label Stock

Instructions for loading various types of label rolls into the printer.

Optional External Label Roll Mount Installation

Guide for installing the optional external label roll mount.

Optional Peel-off Module Installation

Steps to install the optional peel-off module for labels.

Optional Cutter Module Installation

Instructions for installing the optional cutter module.

Top Cover Operation Instructions

Detailed instructions on how to open and close the printer's top cover.

Using the Diagnostic Tool

How to use the diagnostic utility for printer configuration and troubleshooting.

Ethernet Setup via Diagnostic Utility

Configuring Ethernet settings using the diagnostic tool via USB or RS-232.

Installing a Memory Card

Procedure for inserting a memory card into the printer.

Power-on Utilities for Printer Testing

Sensor Calibration: Ribbon and Gap/Black Mark

Calibrating sensors for accurate label detection and printing.

Calibration, Self-Test, and Dump Mode

Performing calibration, self-test, and entering dump mode.

Printer Initialization Procedure

Resetting printer settings to factory defaults.

Configuring Black Mark Sensor as Media Sensor

Configuring the black mark sensor to detect media.

Configuring Gap Sensor as Media Sensor

Configuring the gap sensor to detect media.

Skipping AUTO.BAS Program

Procedure to bypass the AUTO.BAS execution file.

Printer Maintenance and Troubleshooting

Printer Cleaning Procedures

Methods and materials for cleaning printer parts like the print head and roller.

Troubleshooting Printer Issues via LED Status

Understanding LED indicators and common troubleshooting steps.

Resolving Print Quality Problems

Diagnosing and resolving problems affecting print quality.

Understanding LED and Button Operations

Explanation of LED colors and button functions for printer control.