To Next PageTo Next PageWhat does Error Code 32 mean on TSI Incorporated Measuring Instruments?
Error Code 32 on your TSI Incorporated Measuring Instruments device indicates that while performing user calibration of the accessory temperature/humidity probe, the correct probe was not found. The accessory temperature/humidity probe was either not plugged in or is faulty.
What does Error Code 33 mean on TSI Incorporated Measuring Instruments?
Error Code 33 on your TSI Incorporated Measuring Instruments device indicates that while performing user calibration of the accessory temperature sensor, the accessory temperature/humidity probe was found instead. Plug in the selected probe.
What does Error Code 52 mean on TSI Incorporated Measuring Instruments?
Error Code 52 on your TSI Incorporated Measuring Instruments device indicates that the lithium battery voltage is too low. Replace the lithium battery or return to factory.
What does Error Code 58 mean on TSI Incorporated Measuring Instruments?
Error Code 58 on your TSI Incorporated Measuring Instruments device indicates that the offset factor for user temperature sensor calibration is out of range. Re-do user calibration, set temperature sensor calibration to FACT, or return to factory.
General| Measurement Type | Differential Pressure |
|---|---|
| Accuracy | ±0.1 Pa |
| Pressure Units | Pa, inH2O, mmH2O, psi, mbar |
| Display | LCD |
| Power Supply | 4 AA batteries or AC adapter |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Warranty | Two years |
| Temperature Range | 0 to 50 °C (32 to 122 °F) |
