TSI Instruments 3082 User Manual

2-14 Electrostatic Classifier Model 3082 and SMPS Spectrometer Model 3938
4. Insert the neutralizer into the classifier. Hold the neutralizer by placing
one finger on each side of the head and aligning with the cutouts on
the classifier. Lower the neutralizer column into the classifier.
Notes: The top of the neutralizer should be flush with the top of the
classifier. Check for a gap. If there is a gap, the neutralizer is
not seated all the way down.
The ¼” Polydisperse Flow tube sticking out of the side will fit
into the Polydisperse Flow cutout in instrument case.
5. Reinstall the two retaining screws you removed in step 1.
6. Insert the key into the interlock on the neutralizer.
Detailed instructions for operating the Model 3088 Neutralizer can be found
in the Operation and Service Manual, P/N 6006729.

TSI Instruments 3082 Specifications

General

Brand	TSI Instruments
Model	3082
Category	Laboratory Equipment
Language	English