TSI Instruments 3082 User Manual

2-34 Electrostatic Classifier Model 3082 and SMPS Spectrometer Model 3938
To install the flow equalizer assembly, follow these instructions:
1. Remove the flow equalizer
assembly from the SMPS
Accessory Kit.
2. Push the flow equalizer assembly
onto the Monodisperse Flow
port on the DMA. Tighten finger-
tight, then use wrench to tighten
an additional ¼ turn.
C a u t i o n
Nylon ferrules are provided with the flow equalizer assembly. Do NOT
replace the nylon ferrules with metal ferrules as this may result in
permanent swaging of the flow equalizer assembly.

TSI Instruments 3082 Specifications

General

Brand	TSI Instruments
Model	3082
Category	Laboratory Equipment
Language	English