1. GENERAL DESCRIPTION
1 General description
1.1 Introduction
This document refers to the following products of the Vision 307 family:
• Vision 307
• Vision 307Plus
For information about the version history, please see the related Release Note document.
This User Manual is intended for qualified engineers.
1.2 Notation
In the context of this document, the term Vision 307 (or Vision 307 family) refers to the family and all its
products.
The Vision 307 products of the Vision 307 family are referred to as Vision 307 products.
The Vision 307Plus products of the Vision 307 family are referred to as Vision 307Plus products.
1.3 Advanced programming possibilities
Vision 307 runs a Linux operating system on an ARM Cortex-A9 processor. The unit can be programmed
using CODESYS. CODESYS is an IEC 61131-3 compliant development environment for application devel-
opment on a Microsoft Windows PC.
Alternatively, the unit can be programmed with C/C++ using the Linux Yocto distribution and the Qt5 frame-
work. For this purpose, a Software Development Environment (SDE) with a virtual machine is provided.
Customer applications can be downloaded via
• Ethernet
• a USB flash drive connected to the USB OTG port
• a PC connected to the USB OTG port
The device firmware is updated via a USB flash drive connected to the USB OTG port.
For the latest software releases and the Release Note documents for the Vision 307 devices, please see
our TTControl Service Area website https://www.ttcontrol.com/service-area/. The Release Note documents
also contain known issues. We recommend checking the service area regularly for new software releases
and to use the latest available software release.
1.4 Open source license information
Information about the open source libraries used in the development of Vision 307 and its applications can
be found in the Vision 307 Open Source License Information document [3].
© TTControl GmbH 2024. All rights reserved.
Proprietary Information
5
Document Number:
D-156-G-02-003
To Next Page