25
Virtual Bed
After unlocking the Universal Sensor and entering “Select Mode” navigate the menu
using the “Up Button” and or “Down Button”
When “Virtual Bed” is highlighted press the “Select Button”
The Universal Sensor will confirm it is now configured as a Virtual
Bed Sensor.
Suggested Configuration: this can be changed using “Advanced Mode”.
Contact Type NO
Input Channel 1
Cable Connection RJ11
The Universal Sensor can now be connected to a Bed/ Chair Pad (sold separately) and
the Tunstall Lifeline or Telecare System. Tunstall recommends completing a test call
before leaving the property.
To Next Page
Loading...