33
Door Guard
After unlocking the Universal Sensor and entering “Select Mode” navigate the menu
using the “Up Button” and or “Down Button”
When “Door Guard” is highlighted press the “Select Button”
The Universal Sensor will confirm it is now configured as a Virtual
Bed Sensor.
Suggested Configuration: this can be changed using “Advanced Mode”.
Contact Type NC
Input Channel 1
Cable Connection Using the included magnetic contact and RJ11
Monitoring Deactivated Monitoring can be disabled for 60 mins
The Universal Sensor can now be used with the magnetic contacts (included in the
box) and the
Tunstall Home unit. Tunstall recommends completing a test call before
leaving the property.
To Next Page
Loading...