Tunstall Universal Sensor - Notes and Warnings; Service Information; Changing the battery

42
4. Notes and Warnings
Service Information
The Universal Sensor contains no user serviceable parts. It contains a EVE ER14505V
3.6V battery with up to 5 years (typical usage). This battery is user-replaceable and
when it has expired it should be disposed of according to current local regulations.
Changing the battery
To change the battery of the Universal Sensor;
• Place the sensor face down on the desk.
• Remove the battery cover.
• Eject the current battery and dispose of according to local regulations.
• Insert a new 3.6V AA Battery. Tunstall recommends using the EVE ER14505
• Replace the battery cover; ensuring that it is securely fitted.
• The Universal Sensor will power on retaining its previous operational mode.
Note:
Note:Note:
Note: Following a battery change remember to check the configuration is still
Following a battery change remember to check the configuration is still Following a battery change remember to check the configuration is still
Following a battery change remember to check the configuration is still
relevant
relevantrelevant
relevant to the user.
to the user. to the user.
to the user.
Note: Remember to wake the screen using the “Select Button” before
Note: Remember to wake the screen using the “Select Button” before Note: Remember to wake the screen using the “Select Button” before
Note: Remember to wake the screen using the “Select Button” before
beginning programming.
beginning programming. beginning programming.
beginning programming.
Warning
Warning Warning
Warning –
––
– During battery replacement the Universal Sensor wil
During battery replacement the Universal Sensor wilDuring battery replacement the Universal Sensor wil
During battery replacement the Universal Sensor will
ll
l not
notnot
not be able to
be able to be able to
be able to
generate a help call.
generate a help call. generate a help call.
generate a help call.