turck FEN20-4IOL - Writing Process Output Data

Operating
Writing process output data
110
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
10.2 Writing process output data
Word
no.
Bit no.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Basic
0x00 - - - - - - - - - - - - DXP3 DXP2 DXP1 DXP0
IO-Link process output data
0x01
…
0x10
IO-Link port 1,
structure depends on the channel parameterization (0…32 byte per channel)
0x11
…
0x20
IO-Link port 2,
structure depends on the channel parameterization (0…32 byte per channel)
0x21
…
0x30
IO-Link port 3,
structure depends on the channel parameterization (0…32 byte per channel)
0x31
…
0x40
IO-Link port 4,
structure depends on the channel parameterization (0…32 byte per channel)
VAUX1 monitoring
0x41 reserved V1+
(pin 9)
V1+
(pin 7)
V1+
(pin 5)
V1+
(pin 3)
Name Value Meaning
I/O data
DXPx DXP output (output level at C/Q pins (2, 4, 6, or 8 of the 10-pole terminal con-
nector)
0 Output inactive
1 Output active, max. output current 2 A
V1+ (pin x) V1+-output (switching the 24 VDC sensor actuator supply VAUX1 at the V1+
pins (3, 5, 7 or 9 of the 10-pole terminal connector)
0 The 24 VDC sensor/actuator supply at Pin x is switched off.
1 The 24 VDC sensor/actuator supply at Pin x is switched on.