turck TBEN-S2 User Manual

Your Global Automation Partner
Instructions for Use
TBEN-S…
Digital and Analog Modules

turck TBEN-S2 Specifications

General

Brand	turck
Model	TBEN-S2
Category	Control Unit
Language	English

Summary

For Your Safety

Intended use

General safety notes

Essential safety precautions for device assembly, operation, and maintenance.

Notes on Ex protection

Safety guidelines for using the device in explosion-protected circuits.

ATEX and IECEx approval requirements for use in Ex area

Specific requirements for safe installation and use in Ex areas.

Mounting

Mounting the device in Zone 2 and Zone 22

Safety instructions for mounting in hazardous areas.

Grounding the device

Fieldbus and I/O level shielding

Grounding the device – I/O and fieldbus level

Grounding the device – mounting on a DIN rail

Grounding the device – mounting on a mounting plate

Connecting

Connecting the device in Zone 2 and Zone 22

Safety and connection guidelines for hazardous areas.

Connecting the device to Ethernet

Connecting the supply voltage

Connecting digital sensors and actuators

Pin assignments and connection details for digital I/Os.

Connecting analog sensors and actuators

Pin assignments for analog sensor/actuator connections.

Commissioning

Setting the IP address

Guide to setting the device's IP address using Turck Service Tool.

Parameterizing and Configuring

I/O channel parameters

PROFINET parameters

Lists PROFINET device and I/O channel parameters.

Process input data – digital modules

Process input data – analog modules

Process output data – digital modules

Configuring devices at PROFINET

Address setting in PROFINET

FSU – Fast Start-Up (prioritized startup)

Connecting the device to a Siemens PLC in PROFINET

Guide to connecting devices to a Siemens PLC via PROFINET.

Installing the GSDML-file

Step-by-step guide to installing the GSDML file in TIA-Portal.

Connecting the devices to the PLC

Procedure for connecting devices to the PLC in TIA-Portal.

Configuring device functions

Assigning the PROFINET device name

Steps to assign a PROFINET device name.

Setting the IP address in TIA Portal

Guide to setting IP addresses within TIA Portal.

Setting module parameters

Process for configuring module-specific parameters.

Configuring devices at Modbus TCP

Implemented Modbus functions

Modbus registers

Overview of Modbus registers for device configuration and data.

Register mapping of TBEN-S modules

Error behavior (watchdog)

Explains output behavior and BUS LED status during watchdog events.

Connecting the devices to CODESYS PLC with Modbus TCP master

Guide to connecting devices to a CODESYS PLC via Modbus TCP.

Connecting the device to the PLC

Configuring the network interface

Steps to scan network and configure interface for Modbus master.

Modbus TCP slave – configuring the IP address

Guide to setting the IP address for the Modbus TCP slave.

Defining modbus channels

Process of defining input registers for Modbus channels.

Configuring the devices at EtherNet/IP

QuickConnect (QC)

Device Level Ring (DLR)

Diagnostic messages via process data

Connecting the devices to a Rockwell PLC with EtherNet/IP

Guide to connecting devices to a Rockwell PLC via EtherNet/IP.

Adding the devices from the Catalog files to the new project

Steps to copy device entries from catalog files into RS Logix.

Configuring the device in RS Logix

Process for setting module names and IP addresses in RS Logix.

Parameterizing the device

How to parameterize the device using Controller Tags in RS Logix.

Going online with the PLC

Reading process data

Operating

Module LEDs TBEN-S

Evaluating diagnostic data

Guide to interpreting diagnostic data.

PROFINET diagnostics

Diagnostic data mapping and error codes for PROFINET.

Measurement value representation of analog modules

Measurement value representation – TBEN-S2-4AI

Measurement value representation – TBEN-S2-4AO

Troubleshooting

Maintenance

Executing the firmware update

Step-by-step guide for updating device firmware using PACTware.

Technical Data

General technical data

Techincal data – TBEN-S1-8DIP

Detailed technical specifications for the TBEN-S1-8DIP module.

Technical data – TBEN-S1-8DIP-D

Detailed technical specifications for the TBEN-S1-8DIP-D module.

Technical data – TBEN-S2-8DIP

Detailed technical specifications for the TBEN-S2-8DIP module.

Technical data – TBEN-S1-8DOP

Detailed technical specifications for the TBEN-S1-8DOP module.

Technical data – TBEN-S1-4DIP-4DOP

Detailed technical specifications for the TBEN-S1-4DIP-4DOP module.

Technical data TBEN-S1-4DXP

Detailed technical specifications for the TBEN-S1-4DXP module.

Technical data TBEN-S1-8DXP

Detailed technical specifications for the TBEN-S1-8DXP module.

Technical data TBEN-S2-8DXP

Technical data – TBEN-S2-4AI

Technical data – TBEN-S2-4AO