turck TBEN-S2 - Connecting the device to the PLC

Parameterizing and Configuring
Connecting the devices to CODESYS PLC with Modbus TCP master
96
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.7.1 Connecting the device to the PLC
The following components have to be added to CODESYS first, in order to connect the device
to the PLC.
n Ethernet Adapter
n Modbus TCP Master
n Modbus TCP Slave
Adding the Ethernet adapter
 Right-click the Device (TX507-P3CV01).
Fig.58: Project tree