EasyManua.ls Logo

turck FEN20-4IOL - Page 58

turck FEN20-4IOL
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning
Commissioning the device in EtherNet/IP
58
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Attr. no. Attribute
name
Get/set Type Value
Dec. Hex.
4 0x04 Revision
n Major
n Minor
G STRUCT OF:
n USINT
n USINT
Revision of the device which is rep-
resented by the Indentity Object.
n 0x01
n 0x06
5 0x05 Device
status
G WORD WORD
6 0x06 Serial
number
G UDINT Contains the identification number
of the product (the last 3 bytes of the
MAC-ID).
7 0x07 Product
name
G STRUCT OF:
USINT
STRING [13]
i.e.: TBEN-S2-4IOL
Device Status
Bit Name Definition
0…1 reserved default = 0
2 Configured TRUE = 1:
The application in the device has been con-
figured (default setting).
3 reserved default = 0
4…7 Extended Device Status 0011 = no I/O connection established
0110 = at least one I/O connection in RUN
mode
0111 = at least one I/O connection established,
all in IDLE mode
All other settings = reserved
8 Minor recoverable fault Recoverable fault, e.g.:
n Undervoltage
n Force-Mode in DTM active
n Diagnostic active at I/O channel
9…10 reserved
11 Diag Common error bit
12…15 reserved default = 0
Common services
Service code Class Instance Service name
Dec. Hex.
1 0x01 Yes Yes Get_Attribute_All
returns a predefined list of object attributes
5 0x05 No Yes reset
starts the reset service for the device
14 0x0E Yes Yes Get_Attribute_Single
returns the content of a specified attribute
16 0x10 No No Set_Attribute_Single
changes a single attribute

Table of Contents

Related product manuals