Commissioning
Connecting the Devices to a Rockwell PLC with EtherNet/IP
90
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Right-click the EtherNet/IP Scanner in the second instance of the RS Logix and add the
device to the project via Paste. In this example, the configuration with 4 byte in- and 4
byte output data plus diagnostics FEN20_4IOL_4in4out_diag is used.
Fig.43: RSLogix – predefined configurations of FEN20-4IOL in new project
To Next Page
Loading...
