C3 Submersible Fluorometer
998-2300 Rev. H Page 11
The connection icon, located on the upper right of the screen, will
turn green if connected.
Note: If the connection icon does not turn green, disconnect and
reconnect power.
3.2 Software Operation
3.2.1 Settings Screen
The Settings Screen allows users to set the time and date, identify each
optical sensor, update serial numbers, and enable/disable sensors.
♦ Users can manually set the date and time or choose to synchronize
the C3 Submersible Fluorometer to the PC date and time.
♦ Each channel (1-3) in the Settings Screen has a location associated
with it on the C3 Submersible Fluorometer that is numerically labeled
(1-3), respectively. Channels 4-6 are designated for the C6 Multi-
Sensor Platform and are disabled for the C3.
♦ Click on the box adjacent to the channel to enable channel operation.
If there is no sensor installed users will be unable to select that
channel.
♦ Channels can be renamed using the dropdown selections or by
manually entering a name.
♦ The serial number boxes are designed for the C6 Multi-Sensor
Platform. There is no serial number associated with the sensors in
the C3.
♦ Settings will automatically be saved after exiting the Settings screen.
To Next Page
Loading...