C3 Submersible Fluorometer
998-2300 Rev. H Page 12
3.2.2 Current Data and Calibration Screen
The Current Data Screen allows users to view real-time data acquisition,
in both tabular or waveform display, as well as conduct calibrations for
each channel.
Current Data
♦ Channel names are displayed but cannot be changed in the Current
Data screen.
♦ Real-time values are displayed next to each channel and in the
adjacent Data Table.
♦ A calibration button is available for each channel and the depth
sensor.
♦ Real-time data can be saved by selecting the “Start Data Capture”
button. Users will be prompted to enter a file name and file location.
Data files will be saved as .csv format.
Tabular Screen
♦ Real-time data including date, time, units and temperature are
continuously scrolling on the tabular screen for enabled channels.
♦ Channel names will appear in the associated column headings.
♦ If units are not selected during calibration, a relative fluorescence
units (RFU) label will appear.
To Next Page
Loading...