29
Manual 1807 Rev B p/n 001807 0000
The following drawings and parts lists cover all the
parts in each model. Any of these parts may be
ordered from Tuthill for replacement as necessary.
SPARE PARTS
Recommended spare parts are indicated on the
parts lists by an asterisk preceding the description
of the item. This includes all gaskets and O-rings,
the shaft seal, and the discharge valve. It is
recommended that these items be maintained in
stock for use as necessary.
It is also recommended that sufcient AX Vacuum
Pump Oil be kept on hand for at least one oil
change as well as a can of Loctite 515 for sealing
leaks. An accurate vacuum gauge, such as Kinney
McLeod gauge Model TD, be obtained for checking
pump performance.
ORDERING PARTS
When ordering parts, order them by item number
and description, and specify the model and
serial number stamped on the nameplate so that
the pump may positively identied. Tuthill may
substitute newer parts for previous ones if the
particular pump can be identied.
09
REPLACEMENT PARTS
To Next Page
Loading...
Need help?
General
