Page 9 of 102
TVL 351
ISSUE 15
2.7. Standards
The controller meets the following standards / specifications:
BS EN 81-20:2014. Safety rules for the construction and installation of lifts. Lifts for the transport of persons and
goods. Passenger and goods passenger lifts.
BS EN 81-50:2014. Safety rules for the construction and installation of lifts. Examinations and tests. Design rules,
calculations, examinations and tests of lift components.
BS EN 12015:2014. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks.
Emission.
BS EN 12016:2013. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks.
Immunity.
BS EN 81-73:2016. Safety rules for the construction and installation of lifts. Particular applications for passenger
and goods passenger lifts. Behavior of lifts in the event of fire (if requested)
BS EN 81-72:2015. Safety rules for the construction and installation of lifts. Particular applications for passenger
and goods passenger lifts. Firefighters lifts (if requested)
BS EN 81-1:1998+A3:2009. Safety rules for the construction and installation of lifts. Electric lifts
BS EN 81-2:1998+A3:2009. Safety rules for the construction and installation of lifts. Hydraulic lifts
2.8. Certificates
Certificates for EMC compliance and Safety compliance can be supplied when requested - see factory.
2.9. Help - Fault Finding Procedures
Ethos Two provides a number of software tools designed to assist the engineer in fault finding, these tools are
simple to use, The key fault finding tools include:
The “Solutions” button, takes you to a list of current out of service events.
The “Event Logger”, with extensive help system and out of service “Time Line”.
The “Help” key on the main screen, gives an overview on MMI and hardware operation.
Context sensitive help is always available on the screen footer.
See overleaf for a description of the main CPU.
To Next Page
Loading...