Page 48 of 102
TVL 351
ISSUE 15
7. Parameter Adjustment and Storage
Most commonly used parameters can be found within their relevant screens e.g. call dwell settings can be found via
the Car button.
All other settings including commonly used ones can be found by touching the Settings button from the home
screen.
7.1. Parameter Adjustment
Press: Settings → Search Settings
Within this tree menu you will find a list of the settings in function order. Some settings will require you to log in at
technician level. [Password = 222222]
Other settings may require the lift to be in a safe condition. Press the machine room stop switch for these.
Some settings cannot be changed whilst the lift is moving.
Saving / Restoring Parameter Sets:
Press: Settings → View Changes
This will display a list of parameters that have been changed from the factory defaults.
Press: Settings → Backup
This will backup current user setting to the on board non-volatile memory.
Press: Settings → Restore
This will overwrite the user settings with the backup settings.
Press: Settings → Default
This will overwrite the user settings with the factory default settings from the SD card.
7.2. Precautions
The event logger and settings backups are kept on the SD1 uSD card. Do not
remove the SD card whilst the unit is powered up. Ignoring this may corrupt the
card. The unit will function without the card present but certain features in the
logger and settings will be limited.
To Next Page
Loading...