TVLogic LEM-250A - Other Functions: Firmware Upgrade; Firmware Update Procedure; Other Functions: Color Calibration; Auto Color Calibration Process

36 FHD OLED Reference Monitor
6. Other Functions
[6] Firmware Upgrade [7] COLOR CALIBRATION
● The USB portable storage device (Thumb
drive) is needed for Firmware Upgrade.
● Select the PAGE III of [SYSTEM] menu to
activate.
1. Connect the USB to the USB Slot on the front
of the monitor.
2. Set the [S/W UPGRADE] as [ON].
3. The [S/W UPGRADE START] activates when
the USB connection is completed.
● The Probe(USB) is needed for Auto
Color Calibration.
● Select the PAGE III of [SYSTEM] menu to
activate.
1. Connect the Color Probe to the USB Slot on
the front of the monitor.
A supported USB probe (K-10, i1Pro) is
needed for Auto Color Calibration
2. Set the [DEVICE] as the Color Probe which
will be connected.
3. Set the [Color Calibration] as [On].
4. Then the USB Color Probe is searched
automatically.
5. The [Color Calibration] activates when the
USB connection is completed.
4. Select the [S/W UPGRADE START] to start the
rmware update.
*
While the Upgrade is conducting, the monitor
screen turns o and the monitor stops
functioning.
*
When the Upgrade is completed, the monitor
reboots.
*
The Upgrade process takes about 20~30
minutes according to the Firmware type.
6. Set the value of [TARGET LUMINANCE], [K-10
CHANNEL] and [COLORSPACE].
7. Select the [CALIBRATION START] to start the
calibration.
*
After the calibration starts, various patterns
come on the screen and conduct the color
calibration.
*
The Color Calibration takes about 20~60
minutes.
LEM-250A
LEM-250A
SDI A
SDI A
OFF
OFF
OFF
O ON
PAGE IV >> PAGE V
COPY DATA
CAL. LOG COPY START
S/W UPGR A DE
S/W UPGRADE START
PAGE IV >> PAGE V
COPY DATA
CAL. LOG COPY START
S/W UPGR A DE
S/W UPGRADE START
LEM-250ASDI A
PAGE III >> PAGE IV
DEVICE
COLOR CALIBRATION
TARGET LUMINANCE
K-10 CH A NNEL
COLORSPACE
CALIBRATION STARAT
MEASUREMENT START
Y:000.00 x:0.000 y:0.000
LEM-250ASDI A
PAGE III >> PAGE IV
DEVICE
COLOR CALIBRATION
TARGET LUMINANCE
K-10 CH A NNEL
COLORSPACE
CALIBRATION STARAT
MEASUREMENT START
Y:000.00 x:0.000 y:0.000
ON
OFF
80 cd/m2
00:
R E C-709
ON
ON
80 cd/m2
00:
R E C-709