TVLogic TSM-232W User Manual

4 TVLogic Security Monitor
1. Caution
● Always use set voltage.
● AC 100 ~ 240V (1.6A/50~60Hz)
• All operating instructions must be read and
understood before the product is operated.
• These safety and operating instructions must
be kept in safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate
attachments can result in accidents.
• This product must be operated on a power
source specied on the specication label.
If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
• Do not overload AC outlets or extension cords.
Overloading can cause re or electric shock.
• Never insert an object into the product
through vents or openings. High voltage
ows in the product, and inserting an object
can cause electric shock and/or short internal
parts.
For the same reason, do not spill water or
liquid on the product.
• Do not attempt to service the product
yourself. Removing covers can expose you to
high voltage and other dangerous conditions.
Request a qualied service person to perform
servicing.
• If any of the following conditions occurs,
unplug the power cord from the AC outlet,
and request a qualied service person to
perform repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product
or when objects have fallen into the product.
c. When the product has been exposed to
rain or water.
d. When the product does not operate
properly as described in the operating
instructions.
Do not touch the controls other than those
described in the operating instructions.
Improper adjustment of controls not
described in the instructions can cause
damage, which often requires extensive
adjustment work by a qualied technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition. Any noticeable abnormality
in the product indicates that the product
needs servicing.
• In case the product needs replacement
parts, make sure that the service person
uses replacement parts specied by the
manufacturer, or those with the same
characteristics and performance as the
original parts. Use of unauthorized parts
can result in re, electric shock and/or other
danger.
• Upon completion of service or repair work,
request the service technician to perform
safety checks to ensure that the product is
in proper operating condition.

TVLogic TSM-232W Specifications

General

Brand	TVLogic
Model	TSM-232W
Category	Monitor
Language	English