/ 21 /
Press the icon on the Main Screen to navigate to the
850EMT Settings screen as shown in Figure 27.
5.6 850EMT Settings
• Set Date: This option is disabled
• Set Time: Press this option to set the time or change
the currently displayed time to an acceptable format.
The following screen appears as shown in Figure 28.
– Use the numeric keypad to enter the time in the
format hours/minutes.
• Set Language: This option is disabled
• Set Tones: To set audible indications for touch screen
operation and successful IR communications.
Press this button, the following screen appears as
shown in Figure 29.
– When you select the options by pressing it on
the Main menu screen, a tone emanates from the
850EMT. To enable/disable this tone, select Yes/ No
respectively.
– When the 850EMT successfully communicates
with the detector via the IR Mode, a tone emanates
from it. To enable/disable this tone, select Yes/No
respectively.
• Access Management: This function is disabled
• Power Settings: Use this option to find out the status
of the Real Time Clock (RTC) battery and the Main
battery.
Press this tab, the following screen appears as shown
in Figure 30.
Fig. 27: 850EMT Settings
Fig. 29: Set Tones
1 – Negative option is highlighted in red.
2 – Positive options is highlighted in green.
Fig. 30: Power Settings
Fig. 28: Set Time
1 - Field to enter time
1
1
2
SET DATE
ACCESS MANAGEMENT
SET LANGUAGE
To Next Page
Loading...
Need help?
General
