/ 5 /
2 Introduction
The 850EMT Engineering Management Tool is a powerful
and exible tool used in the installation, commissioning,
diagnostics and servicing of Tyco MX detection systems.
The 850EMT allows all the MX addressable devices
to be interrogated, tested and programmed. Its easy-
to-navigate screens capture user requirements in an
intuitive manner.
Fig. 1: 850 Engineering Management Tool - Left Side View
1 - DC IN 12V External Connector
2 - Power On/Off Toggle Switch
Fig. 2: 850 Engineering Management Tool - Right Side View
1 - COM Port
2 - AUX Cable Port
3 - Stylus
1
2
3
1 2
The 850EMTK includes the following:-
• 850EMT MX Service Tool
• MX Service Tool to Ancillary connector lead
• Mains charger adaptor
• 6 x rechargeable AA size NiMH batteries
• USB Memory Stick
• Pack of ten spare pins for Ancillary lead
• Carry case
• Shoulder Strap for 850EMT
• 12V car charger adaptor.
To Next Page
Loading...
Need help?
General
