CHECKING ELECTRIC WIRING
(1) Loose wiring terminals can cause
contact failure and damaged wir-
ings can lead to performance
deterioration of electric devices,
short circuit and fire. Replace or
repair aged and damaged wirings.
(2) If wiring sheath is peeled off, wrap
wiring with insulating plastic tape.
(3) If fasteners or bands to fix wir-
ings are damaged, fix wirings with
clamps.
(
4) Have wirings checked by your
workshop once a year regularly to
avoid fire.
►
④ Firstly, start the engine of the vehi-
cle with the normal battery. Then,
start the engine of the tractor with
the discharged battery.
⑤ After the engine is started, discon-
nect the negative cable first. Then,
disconnect the positive cable.
⑥ Charge the discharged battery for
approx. 30 minutes after the en-
gine is started.
Make sure to connect the posi-
tive terminal first and connect
the negative terminal to the en-
gine body of the tractor with the
discharged battery.
•
WARNING
CHECKING AND REPLACING
FUSE
(1) Body fuse box
Fuses are installed in this tractor
to prevent any possible accident in
case of wiring circuit malfunction.
If the electric system is malfunction-
ing during driving, check for any
blown fuse.
►
T39O517A
Fuse Box
Open circuit
T254O533A
Normal
To Next Page
Loading...
