① Remove the cover of the fuse box.
② Remove the blown fuse.
③ Fit a new fuse with the same ca-
pacity.
④ The function and capacity of each
fuse are indicated on the cover of
the fuse box.
If using fuses other than the
specified, wirings can be over-
heated, leading to a fire. Never
use a fuse with different capac-
ity. Also, never use a steel wire
or foil instead of a fuse.
•
WARNING
(2) High-capacity fuse (50 A)
This tractor is equipped with four
fuses for wirings.
These fuses are blown to cut cur-
rent to the electric circuit in order to
protect wirings. Find the cause for
blown fuses and replace them with
the specified genuine parts.
Cabin type : Four fuse
Non-Cabin type : Three fuse
•
•
T9406
Open circuitNormal
<Inspection>
Check the fuse through the trans-
parent window to see if it is blown.
High-capacity fuse
T4NO508A
To Next Page
Loading...
