5 - 3
MAINTENANCE AND SERVICE
43
5
③ Open the hood and check:
-
Engine oil level
- Coolant level
- Fan belt for looseness and
damage
④ Sit on the driver's seat, turn
the main switch to the "ON"
position and check:
- Fuel gauge for proper op-
eration
- Fuel level
- E n g i n e o i l a n d c ha r g e
warning lamps for blinking
operation
- Turn signal lamp
- Horn operation
- Brake pedal free play
- Clutch pedal play
⑤ Start the engine, drive the
tractor slowly and check:
- Emission color
- Brake pedal operation
- One brake pedal operation
- Steering wheel for heavi-
ness and vibration
- Coolant gauge operation
- Hydraulic operation of 3-point
link
3.
INSPECTING AND CHANGING COOLANT
45NO503A
Check Hoses
Inlet
Radiator
ENGINE COOLANT INSPECTION
AND CHANGE
(1) Inspection
Open the radiator cap and check
that the radiator is filled with cool-
ant up to its filler inlet. If the coolant
amount is insufficient, add more
coolant.
►
Do not open the cap when the
engine is hot. Otherwise, hot
steam can burn you seriously.
Wait until the engine is suffi-
ciently cooled down.
•
WARNING
To Next Page
Loading...
