TYM T494C - Hazard Switch

DESCRIPTION OF TRACTOR CONTROLS
1
2
2 - 7
HAZARD SWITCH
This switch can be used to warn
other vehicles when malfunction oc-
curs in the tractor while driving on
a public road. When pressing the
switch once, the left and right haz-
ard warning lamps blink. Pressing
the switch again turns off the lamps.
►
(2) Turn signal lamp operation
The turn signal lamps can be op-
erated with the main switch in the
"ON" position.
(3) Horn
The horn can be operated with the
main switch in the "ON" position re-
gardless of the light switch.

Operating
Press the switch sounds the horn.
This lever is not automatically
returned to the neutral position.
Therefore, set it back to the
neutral position after turn.
•
NOTE
Left turn
Turn the turn signal switch counter-
clockwise. Then, the left turn signal
lamp and the left turn signal indica-
tor on the instrument cluster blink.
Right turn
Push the turn signal switch clock-
wise. Then, the right turn signal
lamp and the right turn signal indi-
cator on the instrument cluster blink.
•
•
T5NO203A
Hazard switch