DESCRIPTION OF TRACTOR CONTROLS
2 - 30
When leaving the tractor, make
sure to lower the implement and
stop the engine. Others may
operate one of the controls,
leading to a dangerous situa-
tion.
•
WARNING
Set it to the Lock position under
the following conditions to prevent
falling of the implement :
When driving on a public road
When replacing the rotavator
blade or removing straws and
grass
When servicing the implement
•
•
•
WARNING
HY D R AU L IC LOW E RI N G
SPEED CONTROL KNOB
This can be used to adjust the low-
ering speed of the implement.
Adjust the lowering speed according
to the implement type and working
environment.
<Operation>
Rotavator - Slow the lowering
speed.
Plow - Speed up the lowering
speed.
►
•
•
45NO240A
Hydraulic Lowering
Speed Control Knob
To Next Page
Loading...
