DESCRIPTION OF TRACTOR CONTROLS
2 - 12
45NO220A
I N D E P E N D E N T P T O
OPERATION SWITCH
(1) Operation of PTO selection
switch
「OFF」- The PTO shaft is stopped.
「Automatic」-
When the implement is lifted to
the preset height, the PTO shaft
is automatically stopped.
「Manual」-
The rotating status of the PTO
shaft can be controlled by operat-
ing the PTO ON/OFF switch to
the ON/OFF position manually.
►
(13) Engine warning lamp
It comes on when the engine
is malfunctioning.
Engine warning lamp
When Engine warning lamp is
it, ensure that you operator the
tractor only after the engine
RPM reaches at the normal
speed. If this instruction is not
kept, it may cause a perfor-
mance degradation or accident
due to a system error.
•
CAUTION
(12) DPF warning lamp
This lamp blinks when carbon
is accumulated in the diesel
particulate filter. If this lamp
blinks, press the regeneration
button.
DPF warning lamp
To Next Page
Loading...
