5 - 16
MAINTENANCE AND SERVICE
JUMP START
① Turn off all electric devices.
② Connect the positive terminal of
the normal battery to the positive
terminal of the discharged bat-
tery with the jump cable.
③ Connect the negative terminal
of the normal battery to the en-
gine body of the tractor for the
discharged battery with the jump
cable.
►
T254O532A
④ Firstly, start the engine of the
vehicle with the normal battery.
Then, start the engine of the
tractor with the discharged bat-
tery.
⑤ After the engine is started, dis-
connect the negative cable first.
Then, disconnect the positive
cable.
⑥ Charge the discharged battery
for
approx. 30 minutes after the
engine is started.
Make sure to connect the posi-
tive terminal first and connect
the negative terminal to the en-
gine body of the tractor with the
discharged battery.
•
WARNING
CHECKING ELECTRIC WIRING
(1) Loose wiring terminals can cause
contact failure and damaged wir-
ings can lead to performance
deterioration of electric devices,
short circuit and fire. Replace or
repair aged and damaged wirings.
(2) If wiring sheath is peeled off, wrap
wiring with insulating plastic tape.
(3) If fasteners or bands to fix wir-
ings are damaged, fix wirings with
clamps.
(4) Have wirings checked by your
workshop once a year regularly to
avoid fire.
►
To Next Page
Loading...
