EasyManua.ls Logo

TYPHOON Q500+ - Page 35

TYPHOON Q500+
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POSSIBLE CAUSE
‘Compass error’ is indicated by the LED.
TYPHOON is in No Fly Zone.
TYPHOON is above 8,000 feet above MSL.
Incorrect motor start up procedure.
TYPHOON is too close to a metal object or metal surface .
Compass needs to be calibrated .
EMERGENCY Mode. Possibly due to obstructed propeller
during motor start up.
Weak GPS signal.
U.S. Government has raised threat level.
Vibraon levels high, indicated by shaky landing gear.
SOLUTION
See below for troubleshoong ‘compass error’.
Move at least 4 miles away from no fly zone. Most major
airports are no fly zone areas.
Move TYPHOON below 8,000 feet above MSL.
Review Motor Starng/Stopping procedure in manual.
Move TYPHOON away from large metal objects or surfaces.
Calibrate compass.
Check that nothing is obstrucng any propeller/motor, turn
TYPHOON off then back on again.
Confirm that the flying area has 100 degrees of clear view of
the sky.
Wait for threat level to be reduced before flying.
Check to ensure propellers are not bent, nicked or damaged
in any way. Replace damaged propellers.
ISSUE
TYPHOON Motors won’t
start
TYPHOON Flashes orange
twice between indicaons
TYPHOON beeps constant-
ly and motors won't start
TYPHOON Won’t hold
posion in hover
34

Related product manuals