TYPHOON Q500+ - Follow Me Function

14
FOLLOW ME FUNCTION
The Follow Me funcon allows TYPHOON to follow the pilot, adjusng its
locaon to the locaon of the ST10+. This funcon is enabled when ST10+
GPS posioning completes, and the TYPHOON is using shared GPS signal
with ST10+. At this me, you will see on ST10+ screen, the number of
connected satellites is 6 or more. TYPHOON's Main LED Status Indicator
will blink white every three seconds.
When in Follow Me funcon, the TYPHOON will follow the movement of
ST10+ if there is no extra operaon on the ST10+. The flight status is also
controllable when you operate ST10+ and CGO2+.
Important Note: In Follow Me funcon, the aircra will maintain a constant
altude and cannot detect obstacles. Pilots who change their altude by
for example, moving to higher ground, during flight should be mindful of
this.