C099-F9P - User Guide
UBX-18055649 - R02 C099-F9P quick start Page 8 of 48
• Click OK to close the dialog and connect to the service
• In the Data View of u-center, the Fix Mode should change from “3D” to “3D/DGNSS” when
RTCM corrections are received. The RTK LED will blink in green color.
• Eventually, the status will change to “3D/DGNSS/FIXED” and the RTK LED will show a steady
green color.
Figure 3: u-center showing a view of the ZED-F9P default operation
To Next Page
Loading...